JIS G3461 carbon steel pipes are mainly used for heat exchange inside and outside pipes, such as water pipes, flue gas pipes, superheater pipes, air preheater pipes, etc. Its application areas include: boiler pipes, heat exchanger pipes, and condensers. It can also be used in the chemical and petroleum industries, but cannot be used under low temperature conditions.
Mar 05, 2024 read moreJIS G3467 boiler tubes include carbon steel tubes, alloy steel tubes, stainless steel tubes and nickel-chromium iron alloy tubes. Its application is for heating fluids in open-fire heaters such as boilers in the petrochemical industry.
Mar 04, 2024 read moreJIS G3454 carbon steel pipe is used under pressure conditions that limit the maximum temperature to 350°C. If higher pressure piping is required the JIS G 3455 standard should be considered. JIS G3454 steel pipes can be manufactured into seamless steel pipes or resistance welded steel pipes, and the buyer can specify the quality requirements for hot or cold working conditions.
Mar 04, 2024 read moreThis specification covers nominal and minimum wall thickness seamless chromium-molybdenum seamless pipe for use in the power generation and petrochemical industries. ASTM A335 seamless steel pipe ordered in accordance with this specification shall be suitable for welding, bending, flanging (vanstoning) and similar forming operations. With the addition of chromium and molybdenum, ASTM A335 has good tensile strength, good resistance to high temperatures and corrosion.
Mar 01, 2024 read moreASTM A192 Carbon Steel Tube Specification covers seamless carbon steel boiler tubes for high pressure applications. We will develop recommended pipe sizes after receiving your inquiry. A printout or sketch of the part to be produced should be included. Grade, chemical analysis and surface condition are carefully considered, and the production process is customized to obtain the best pipe for the end use.
Feb 29, 2024 read moreASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe for use at low temperatures. ASTM A333 alloy pipe shall be manufactured using seamless or welding processes, with no filler metal added during the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydraulic tests, and non-destructive electrical tests should be carried out in accordance with specified requirements. Certain product sizes may not comply with this specification because thicker wall thicknesses can adversely affect low temperature impact properties.
Feb 28, 2024 read moreASTM A213 covers seamless ferritic and austenitic steel boilers, boiler tubes and heat exchanger tubes for high temperature applications, with designated grades T5, TP304, etc. Grades with the letter H have higher creep rupture strength than grades without the H. ASME SA213 seamless pipe is a chromium-molybdenum pipe containing chromium and molybdenum alloy elements.
Feb 27, 2024 read moreASTM A 210 covers seamless steel boiler tubes and superheater tubes, which are medium carbon tube products. Product types include safe end tubes, minimum wall thickness arch tubes and support tubes, and tube sizes. Materials manufacturing was stifled. The manufacturing method follows a seamless process and the final product can be hot or cold worked. Surface conditions can be customized according to your requirements. Test requirements: tensile test, flattening test, expansion test, hardness test, hydraulic or non-destructive electrical test, etc.
Feb 26, 2024 read moreASTM A179 covers minimum wall thickness seamless cold drawn mild steel tubing for use in tubing, heat exchangers, condensers, and other heat transfer equipment. Seamless ASTM A 179 steel pipes are supplied and produced using cold drawn method. The chemical composition contains carbon, manganese, phosphorus, and sulfur. Required tests: hardness test, flattening test, flaring test, flange test, hydraulic pressure test.
Feb 23, 2024 read moreASTM A106 pipe is the standard specification for seamless carbon steel pipes for high temperature applications. The application range is the transport of gases or liquids in refineries and boiler plants where high temperatures and pressures are encountered. Pipe produced in accordance with ASTM A106 shall be suitable for bending, flanging, welding, and other forming operations.
Feb 20, 2024 read morehe ASTM A178 standard refers to minimum wall thickness for resistance welded pipe. Materials are carbon steel and carbon manganese steel, ASTM A178 pipes are used for boiler tubes, boiler flues, superheater flues and safety ends. Steel grade A (mild carbon steel), C (medium carbon steel) or D (carbon manganese steel). The manufacturing process must include heat treatment, cooling and then welding. If requested by the customer, a crushing test can be performed.
Feb 19, 2024 read moreAPI 5L X42 steel pipes are manufactured in accordance with API Spec 5L and are used for pipelines transporting natural gas, water, petroleum and petroleum industries, including low and medium pressure vessels and boilers. According to the material classification, it is a kind of carbon steel pipe. The manufacturing methods include seamless pipe and welded pipe.
Feb 18, 2024 read moreContinental Steel Co.,Ltd(CSC) is a pioneering manufacturer, stockist, and supplier of steel pipe products.