Tee

Pipe Fitting Tee Type: equal tee(EQ tee), straight tee, reducing tee,  carben steel tee(CS tee), alloy steel tee(AS tee), stainless steel tee(SS tee), laterial tee, barred tee, steel saddle tee

SIZE：1/2"-48"(Dn15-Dn1200) 

WALL THICKNESS:SCH5S,SCH10S,SCH10,SCH20,SCH30,SCH40,STD,XS,SCH60,SCH80,SCH100,SCH120,SCH140,SCH160,XXS,2MM

MATERIAL：Carbon Steel :ASTM, A234WPB, A234WPC, A420WPL6 ,Q235,10#, A3, Q235A,  20G,16Mn,  

DIN St37, St45.8, St52.4,St.35.8,St.35.8.

Stainless Steel:1Cr18Ni9Ti  0Cr18Ni9  00Cr19Ni10  0Cr17Ni12Mo2Ti  00Cr17Ni14Mo2   304  304L  316  316L

Alloy Steel:16Mn  Cr5Mo 12Cr1MoV 10CrMo910 15CrMo 12Cr2Mo1, A335P22  St45.8, ASTM A860 WPHY X42 X52 X60 X70

Pipe Fitting TeeANSI B 16.9/ANSI B16.28/MSS SP43/MSS P75/JIS2311/JIS 2312/JIS2313/ DIN2615 /GB-12459/GB-T13401 etc…

A tee is also called triplet,three way and “T” pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but ‘reducing’ tees are available as well. it means the one or two ends are differ in dimension.due to thisdimension differ,the makes the tee fittings with the capacity to control the volume when requried.

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

types of steel pipe tee：

According to branch diameters and functions there are:

Equal Tee

Reducing Tee (Reducer Tee).

According to connection types are:

Butt Weld Tee

Socket Weld Tee

Threaded Tee.

According to material types there are:

Carbon Steel Pipe Tee

Alloy Steel Tee

Standards: ASTM A403 (For wrought Austenitic stainless steel tee pipe fittings), ASTM A270 (For seamless and welded Austenitic and Ferritic stainless steel sanitary tubing tee)

Grades: TP 304, 304L, 316, 316L, 310, 317 and 321.

Carbon steel tee material: ASTM A234 WPB, WPC; MSS SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, 60, 65 and 70. ASME/ANSI B16.9 for BW tee fittings, ASME/ANSI B16.11 for socket weld and threaded tee fittings.

Alloy steel material: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91

Duplex Stainless Steel: S31803(SAF2205),S32750(SAF2507),S31500(3RE60)

Reducing tee：Reducing tee has a branch that is smaller than main run allows for branching off to a smaller pipe of equipment from main run.

Equal tees：Equal tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

Lateral Tee：A Lateral pipe tee means a pipe fitting which is similar to a tee but has a side opening outlet branch at a 45 degree angle.

Barred Tee：A barred tee is a tee or any fitting with a branch used in pipelines that is pigged and has a restriction bar welded internally preventing the pig from traveling down a branch connection.

Our factory produces a variety of pipe fittings.

Flange
Size Range: 1/2” - 120” ( DN 15 - DN 3000)
Rating: 150, 300, 400, 600, 900, 1500, 2500;
Type: Welding Neck, Long Welding neck, Slip on, Blind, Spectacle Blind,Lap joint, Socket weld, Threaded, Orifice, Ring Joint Flange, Spacer and Blank, Anchor Flange, API flange, etc.
Standard:
ANSI B16.5, ANSI B16.47 Series A & Series B, AWWA C207, BS4504,
BS3293, DIN EN1092-1, API590, JIS/KS, ISO 7005-1, JB/T, etc.
Material:
Carbon steel, Low Temperature Carbon Steel, High Yield Carbon Steel,
Plate Material, Low Alloy Steel, Stainless Steel, Duplex
Application:
Can be widely used in the field of Gas, Oil, Pipeline, Water Supply, Electricity and Machinery.
Stainless Steel:
C.S: A36, A105, A266 CL2/CL4, ST37.2, C22.8, S235JR, S355JR
LTCS: A350 LF2 CL1/CL2/LF3
HYCS: A694 F42/F52/F60/F62/F65/F70
Plate: A515 Gr60/70, A516 Gr 60/70, A285 Gr A B C, A240 304, A240 316
LAS: A182 F5, F9, F11 CL1/CL2/CL3, F12 CL1/CL2, F22 CL1/CL3, F91
SS: A182 F304/L, F304H, F316/L, F317/L, F44
Duplex SS: A182 F51/UNS 31803, F53/UNS 32750

Elbow
Product Specification:
Type: Seamless / Welded
Size Range: 1/2” - 24” ( DN 21.3 - DN 610) for Seamless；
26” - 96” ( DN 660 - DN 2438.4) for Welded.
Wall Thickness: SCH 5S - XXS
Style: Long Radius (LR) / Short Radius (SR)
Angle: 45 Degree, 90 Degree, 180 Degree or in specified degree.
Standard:
ASME/ANSI B16.9, ASME B16.28, MSS SP43, DIN2605, DIN2617, DIN2516, JISB2311, etc.
Application:
Can be widely used in the field of Chemical,  Construction, Water Supply, Drainage, Oil, Light & Heavy Industries, Freezing, Sanitation, Fire Control, Electric Power, Aerospace, shipbuilding, etc.

Bend
Product Specification:
Type: Seamless / Welded
Size Range: 1/2” - 24” ( DN 21.3 - DN 610) for Seamless;
26” - 80”( DN 660 - DN 2032) for Welded.
Wall Thickness: SCH 10 - XXS
Style: R=3D R=5D R=7D R=10D or specified Radius
Angle:  From 30 to 180 Degree or in specified degree.
Standard:
ASME B31.4, ASME 31.8, ASME B16.49, JIS, DIN, GB, HG, SH, JB, HGJ, etc.
Material:
Carbon steel, Low Temperature Carbon Steel, High Yield Carbon Steel, Alloy Steel, Stainless Steel.
C.S: ASTM/ASME A234 WPB / WPC, ST37.0, ST35.8, ST45.8
LTCS: A420 WPL6, ASTM/ASME A402 WPL3 / WPL6
HYCS: ASTM/ASME A860 WPHY 42 / 46 / 52 / 60 / 65 / 70
AS: ASTM/ASME A234 WP1 / WP12 / WP11 / WP22 / WP5 / WP9 / WP91 / 15Mo3 / 15CrMoV / 35CrMoV
SS: ASTM/ASME A403 WP304 / 304L / 304H / 304LN / 304N  / 316L / 316H 321H / 347H

Cap
Size:
NPS from 1/2'' to 48'', DN from 12 to 1200,WT: 2-80mm, SCH 40/80/XXS
Material:
Carbon Steel --- ASTM A234 WPB ANSI B 16.9, DIN 2606 N-5 ST.37.0;
Stainless Steel --- ASTM 403 304/304L, 316/316L,316Ti,321,317L,310S;
Alloy Steel --- ASTM A234 WP 1/5/9/11/12/22/91
Bend Radius: 2.5D/3D/4D/5D/6D/7D/8D/9D/10D

Reducer
Outside Diameter:
Seamless Pipe Tee ( 1/2″～24″), ERW / Welded / Fabricated Pipe Tee (1/2″～48″)
Types: Concentric Reducers, Eccentric Reducers
Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40,
STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Sockolet
Sockolet have a socket into which a plain end. branch pipe is inserted, then fillet welded together. It is a type of self-reinforced branch fitting.
Dimensions：
Standard: MSS SP-97
Size: 1/4 to 4 Inch / DN6 to DN100
Pressure: 3000 LB and 6000LB
Alloy Steel: ASTM A182 F1, F5, F9, F11, F12, F22, F91
Carbon Steel: ASTM A105, A350 LF2,LF3. A694 F52, F60, F65, F70
Stainless Steel: ASTM A182 F304, F316, F317, F321, F310
Duplex Stainless Steel: ASTM A182 F51, F53, F55

Lap Joint Stub Ends
Size range: 1/2” to 36”
Grade: ASME/ASTM SA A234
Type: Long and short lap joint stub ends
Wall Thickness: Schedule 5s, 10s, 20s, Sch10, Sch20, Sch30, STD, Sch40 and etc.
standard of stub end:
ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, ASTM A234, ASME SA234 WPB ,
WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

Pipe flanged Spool type:Seamless & Welded
Value Added Services Provided By Manufacturer:Design, Engineering & Fabrication
Size:114mm to 2500mm diameter (Seamless & Welded, Fabricated)
Operating Pressures:As required/as per drawings
Maximum Velocities : As required/as per drawings
Operating Temperatures：As required/as per drawings
Hydro Tested Pressure:As required/as per drawings
Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard:ND-6,10, 16, 25, 40
Thickness :As required/as per drawings
Specialize:As required/as per drawings
Form :Round, Square, Rectangle Hydraulic, Horn Pipe etc.
Material:Carbon Steel, Stainless Steel, Hastelloy, Alloy Steel, Nickel Alloy, Copper, Duplex Steel & Super duplex
Sizes：By Manufacturer:as per customer specification
Usage/Applications :Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects.

A piping system is a vast network of components each, having its own unique function. Pipe Spools are devices in this vast system, which are pre-fabricated across smaller segments. These components include flanges, fittings, and pipes, which are mounted during the fabrication process and delivered to the consumer. A Pipe Cleaner Spool is prone to corrosion due to their exposure to different environmental elements. This is why we offer these components with enhanced tolerances after processing them further. The Pipe Chain Spool is very reliable and durable