Alloy seamless pipe

OCTG

Casing Pipe Tubing Pipe Sucker rod Tubing and Casing Coupling Pup Joint Drill Pipe Drill Collars Screen Pipe

Seamelss steel pipe

Seamless Steel Pipe Boiler Steel Pipe Line Pipe Honed Tube Hydraulic cylinder pipe U Tube Heat Exchanger Tube Low temperature pipe Seamless Precision Tubes Carbon Seamless Mechanical Tube

Carbon welded steel pipe

SSAW Carbon steel pipe LSAW Carbon Steel Pipe ERW Carbon Steel Pipe

Stainless Steel Pipe

Welded Stainless Steel Pipe Seamless stainless steel pipe

Anti-corrosion coated steel pipe

Ceramic-lined Pipe Rubber-lined Pipe Concrete Coated Pipe 2PE /3PE coated pipe FBE coated pipe Galvanized steel pipe

Alloy seamless pipe

Aluminum steel pipe Titanium alloy pipe Hastelloy alloy pipe Nickel-Copper Alloy Pipe Nickel Alloy pipe Alloy Steel Pipe

Pipe Fitting

Reducer Bend Tee Cap Elbow Flange

Steel Hollow Section

Stainless Hollow Section Carbon Hollow Section

Steel Plate

Aluminum Steel Plate Carbon steel Plate Stainless Steel Plate

Steel Profile

Angle steel Channel Steel I-Beam H Section

Nickel-Copper Alloy Pipe

Product Name: Nickel and copper-nickel alloy stainless steel pipe,Nickel-copper alloy pipe,Seamless Copper Tubes

Outer Diameter: 8-2500mm, (3/8"-100")

Wall Thickness: 0.3-150mm,(SCH10-XXS)

Length: 2000mm, 2438mm, 3000mm, 5800mm, 6000mm,12000mm, etc

Standard: ASTM B68/B88/B75/B111,JIS H3300, BS2871, EN1057, EN12449, etc

Surface: BA,2B,NO.1,NO.4,4K,HL,8K

Certification: ISO, SGS,BV

Technique: Cold Rolled Hot Rolled

Grade(ASTM UNS):N04400、N05500、N4、N6、254Smo、17-4PH、2507、904L、      304、304L、 321、 316、316L、317L、347H、309S、310S、904L、S32205、2507、254SMOS、  32760、S31703、S31603、316Ti、S31635、S31254、N08926、2205、S32205、S31008、S30908、S32750、  S32760、630 etc

Grade (EN): 1.4301,1.4307,1.4541,1.4401,1.4404,1.4571,1.4438,1.4539,1.4547,1.4529,1.4410,1.4501,1.4462,1.4845,1.4542,,etc

Introduction

Product Name: Nickel and copper-nickel alloy stainless steel pipe

Outer Diameter: 8-2500mm, (3/8"-100")

Thickness: 0.3-150mm,(SCH10-XXS)

Length: 2000mm, 2438mm, 3000mm, 5800mm, 6000mm,12000mm, etc

Standard: ASTM,AISI,JIS,GB, DIN,EN

Surface: BA,2B,NO.1,NO.4,4K,HL,8K

Certification: ISO, SGS,BV

Technique: Cold Rolled Hot Rolled

Grade(ASTM UNS):N04400、N05500、N4、N6、254Smo、17-4PH、2507、904L、      304、304L、 321、 316、316L、317L、347H、309S、310S、904L、S32205、2507、254SMOS、  32760、S31703、S31603、316Ti、S31635、S31254、N08926、2205、S32205、S31008、S30908、S32750、  S32760、630 etc

Grade (EN): 1.4301,1.4307,1.4541,1.4401,1.4404,1.4571,1.4438,1.4539,1.4547,1.4529,1.4410,1.4501,1.4462,1.4845,1.4542,,etc

Copper Nickel alloys 

Copper Nickel 70/30 Seamless Pipes
Cupro Nickel 70/30 Seamless Pipes, UNS C71500 Seamless Pipes, DIN 2.0882 Seamless Pipes

Copper Nickel 70/30 Seamless Tubes
Cu-Ni 70/30 Seamless Tube, CuNi UNS C71500 Seamless Tubing, DIN 2.0882 Seamless Tubes

Copper Nickel 70/30 Welded Pipes
Cupro Nickel 70/30 Welded Pipes Supplier, UNS C71500 Welded Pipes, Cu-Ni DIN 2.0882 Welded Pipe

Copper Nickel 70/30 Welded Tubes
70/30 CuNi Welded Tubing, UNS C71500 Welded Tube, ASME SB111 Copper Nickel 70/30 Welded Tubing

Copper Nickel 70/30 ERW Pipes
Cupro Nickel 70/30 ERW Pipe Supplier, CuNi Alloy UNS C71500 ERW Pipes, Cu-Ni DIN 2.0882 ERW Pipe

Copper Nickel 70/30 ERW Tubes
UNS C71500 ERW Tube, DIN 2.0882 ERW Tubing, ASTM B111 Cupro Nickel 70/30 ERW Tubes, Cu-Ni 70/30 ERW Tubes

Cupro Nickel Tubes 90/10 for Heat Exchangers & Condensers

Cupro Nickel Tubes 90/10 for Automobile IndustriesCopper Nickel 90/10 Seamless Pipes

Cupro Nickel 90/10 Seamless Pipes, UNS C70600 Seamless Pipes, DIN 2.0872 Seamless Pipes

Copper Nickel 90/10 Seamless Tubes
Cu-Ni 90/10 Seamless Tube, CuNi UNS C70600 Seamless Tubing, DIN 2.0872 Seamless Tubes

Copper Nickel 90/10 Welded Pipes
Cupro Nickel 90/10 Welded Pipes Supplier, UNS C70600 Welded Pipes, Cu-Ni DIN 2.0872 Welded Pipe

Copper Nickel 90/10 Welded Tubes
90/10 CuNi Welded Tubing, UNS C70600 Welded Tube, ASME SB111 Copper Nickel 90/10 Welded Tubing

Copper Nickel 90/10 ERW Pipes
Cupro Nickel 90/10 ERW Pipe Supplier, CuNi Alloy UNS C70600 ERW Pipes, Cu-Ni DIN 2.0872 ERW Pipe

Copper Nickel 90/10 ERW Tubes
UNS C70600 ERW Tube, DIN 2.0872 ERW Tubing, ASTM B111 Cupro Nickel 90/10 ERW Tubes, Cu-Ni 90/10 ERW Tubes

 

Specification

The Move To Copper-Nickel Tubing

Copper had been proved since the early days to have many good attributes. It was easy to bend and had
very high corrosion resistance, but there was concern about its low corrosion-fatigue strength. When cupro
nickel was introduced, it displayed corrosion resistance similar to copper, higher general strength and better
fatigue strength.


Properties of Copper-Nickel Brake Tubing

The copper-nickel alloy used for brake tubing typically contains 10% nickel, with iron and manganese
additions of 1.4% and 0.8% respectively. The product conforms to ASTM B466 (American Society for Testing
and Materials), which specifies dimensions, tensile strength and yield strength. Formability and internal
cleanliness conform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor
Manufacturers and Traders). Also, the alloy meets the requirements for pressure containment, fabrication
and corrosion resistance for ISO 4038 (International Standards Organization) and SAE J1047.


Cupronickel or copper-nickel or "cupernickel" is an alloy of copper that contains nickel and strengthening
elements, such as iron and manganese. Cupronickel is highly resistant to corrosion in seawater, because its
electrode potential is adjusted to be neutral with regard to seawater. Because of this, it is used for piping, heat
exchangers and condensers in seawater systems, as well as marine hardware, and sometimes for the propellers,
crankshafts and hulls of premium tugboats, fishing boats and other working boats.


Cupronickel other registered as tradenames are Alpaka or Alpacca' (registered trademark), Argentan Minargent, and
the French term name Cuivre blanc. Occasionally, cupronickel is also referred to as "hotel silver", plata alemana
(Spanish for "German silver"), "German silver" and "Chinese silver".


Sometimes called cupro-nickels, there exists a range of different copper nickel alloys that possess different
properties and hence are suited to a range of different applications. Some of the better known copper nickel alloys
include:
Copper with 10% nickel
Copper with 30% nickel
Copper with 25% nickel with 0.05-0.4% manganese
Copper with 45% nickel (also known as constantan)

 

Chemical Composition of Copper Nickel 70/30 Pipes & Tubes

Grade Cu Mn Pb Ni Fe Zn
Cu-Ni 70-30 65.0 min 1 max .05 max 29-33 0.4-1.0 1 max

Mechanical Properties of Cu-Ni 70/30 Pipes and Tubing

Properties Metric Imperial
Tensile strength, ultimate 372-517 MPa 54000-75000 psi
Tensile strength, yield (depending on temper) 88.0-483 MPa 12800-70100 psi
Elongation at break (in 381 mm) 45.0% 45.0%
Charpy impact 107 J 78.9 ft-lb
Machinability (UNS C36000 (free-cutting brass) = 100%) 20% 20%
Shear modulus 57.0 GPa 8270 ksi
Poisson's ratio 0.34 0.34
Elastic modulus 150 GPa 21800 ksi

Physical Properties of Cupro Nickel 70/30 Pipes & Tubes

Properties Metric Imperial
Density 8.94 g/cm3 0.323 lb/in3
Melting point 2140°F 1171°C

 

Chemical Composition of Copper Nickel 90/10 Pipes & Tubes

Grade Cu Mn Pb Ni Fe Zn
Cu-Ni 90-10 88.6 min 1.0 max .05 max 9-11 max 1.8 max 1 max

Mechanical Properties of Cu-Ni 90/10 Pipes and Tubing

Properties Metric Imperial
Tensile strength, ultimate 303-414 MPa 43900-60000 psi
Tensile strength, yield (depending on temper) 110-393 MPa 16000-57000 psi
Elongation at break (in 254 mm) 42.00% 42.00%
Machinability (UNS C36000 (free-cutting brass) = 100%) 20% 20%
Shear modulus 52.0 GPa 7540 ksi
Poisson's ratio 0.34 0.34
Elastic modulus 140 GPa 20300 ksi

Physical Properties of Cupro Nickel 90/10 Pipes & Tubes

Properties Metric Imperial
Density 8.94 g/cm3 0.323 lb/in3


All copper nickel alloys consist of only one phase as the copper nickel binary system exhibits complete solid
solubility

Applications of Copper Nickel alloys:

Sea Water Condensor Systems And Desalination Plants
Due to the good resistance to sea water corrosion, the copper nickel alloy Copper 90/10 and copper nickel alloy
Copper 70/30 are employed for sea water condenser systems and in desalination plants, as well as pipe work in
chemical plants.

Automotive Applications
Due to the fact that the copper nickel alloy Copper 90/10 requires no surface protection and hence gives extra
safety, this copper nickel alloy is being increasingly employed for brake and hydraulic suspension systems and
cooling systems in cars and commercial vehicles.

Marine Applications
The good resistance to biofouling and sea water corrosion resistance of the copper nickel alloys, Copper 90/10 and
Copper 70/30 alloys have lead to its use in applications such as cladding for ships' hulls, legs of oil rig platforms
and sea water intake screens.

Coins
The copper nickel alloys composed of copper with 25% nickel with 0.05-0.4% manganese is commonly used for the
manufacture of coins, medals and other semi valuable applications.

Resistance Wire
Due to the very low temperature co-efficient of electrical resistivity, the copper nickel alloys composed of copper with
45% nickel alloy is used for resistance wire in high precision resistors. This property of copper nickel alloys allows
the resistor to operate at almost exactly the same resistance regardless of temperature.

Thermocouples
The copper nickel alloys composed of copper-45% nickel alloy is also used for thermocouples as it develops a high
and uniform EMF when coupled with other metals such as copper and iron.

Other
Copper nickel alloys are also used in cooling circuits, ammunition, sea water corrosion-resistant assemblies,
condenser tubes.

Other Applications"

  • Sea water pipework
  • Offshore fire water systems
  • Heat exchangers and condensers
  • Sheathing of legs and risers on offshore platforms and boat hulls
  • Hydraulic lines
  • Fish cages for aquaculture
  • Desalination units

Property Table of Copper Nickel Alloys

lammability  5
Fresh Water  5
Organic Solvents 5
Oxidation at 500C  3
Sea Water  5
Strong Acid 2
Strong Alkalis  5
UV  5
Wear  5
Weak Acid 4
Weak Alkalis  5
 

Production process

Our Factory

Packaging pictures

If you have any inquiries and questions, please contact CONTINENTAL STEEL CO.,LTD. at any time. Thanks in advance. Welcome!

EMAIL US

LEAVE US A MESSAGE

Welcome to fill the form below to contact us

*Name
*Tel
*Email
*Company Name
*Message
CONTINENTAL STEEL CO.,LTD

Continental Steel Co.,Ltd(CSC) is a pioneering manufacturer, stockist, and supplier of steel pipe products.

Get a Quote

Contact Us

CONTINENTAL STEEL CO.,LTD