EN 10216-1 specifies the technical delivery conditions for non-alloy seamless steel tubes for pressure purposes. P235TR1 is a grade under this standard, primarily used in boilers, heat exchangers, and pressure vessels due to its good strength and weldability.
Continental Steel Co.,Ltd is professional carbon steel seamless pipes manufacturer, for more details, please contact:sales@continental-steel.com
- Chemical Composition (Typical Values)of EN 10216-1 P235TR1 Seamless Carbon Steel Pipe
|
Element
|
Composition (%)
|
|
Carbon (C)
|
≤ 0.16
|
|
Silicon (Si)
|
≤ 0.35
|
|
Manganese (Mn)
|
≤ 1.20
|
|
Phosphorus (P)
|
≤ 0.025
|
|
Sulfur (S)
|
≤ 0.015
|
Low carbon content ensures good weldability and forming properties.
- Mechanical Propertiesof EN 10216-1 P235TR1 Seamless Carbon Steel Pipe
|
Property
|
Value
|
|
Minimum Yield Strength (MPa)
|
235
|
|
Tensile Strength (MPa)
|
360 - 500
|
|
Elongation (%)
|
≥ 25
|
|
Impact Toughness
|
Not specified for TR1
|
High elongation ensures good ductility, making it suitable for pressure applications.
- Manufacturing Processof EN 10216-1 P235TR1 Seamless Carbon Steel Pipe
✅ Hot Finished (HF) or Cold Finished (CF) Seamless Pipes
Manufactured by hot rolling or cold drawing, depending on required tolerances.
No specific heat treatment is required for P235TR1, but normalizing can be applied based on customer needs.
✅ Surface Finish
Pipes can be black-painted, oiled, or shot-blasted to prevent corrosion.
Ends can be plain, beveled, or threaded as per application requirements.
- Testing Requirementsof EN 10216-1 P235TR1 Seamless Carbon Steel Pipe
P235TR1 tubes undergo several quality control tests to meet EN 10216-1 standards:
(1) Chemical & Mechanical Testing
Spectrochemical Analysis: Ensures material composition.
Tensile Test: Confirms yield strength and tensile strength.
Hardness Test: Checks surface hardness.
(2) Non-Destructive Testing (NDT)
Eddy Current Testing (ET): Detects surface defects.
Ultrasonic Testing (UT) (if required): Finds internal flaws.
(3) Dimensional & Surface Inspection
Ensures outer diameter (OD), wall thickness (WT), and length comply with EN 10216-1 tolerances.
Surface quality is checked for cracks, scale, or other defects.
(4) Pressure & Leak Testing
Hydrostatic Test (HT): Ensures pipe integrity under pressure conditions.
- Applicationsof EN 10216-1 P235TR1 Seamless Carbon Steel Pipe
- Boilers & Heat Exchangers – High temperature and pressure resistance.
- Pressure Pipelines – Used in gas, steam, and air transport under moderate pressure.
- Machinery Construction – Components requiring good machinability and weldability.
English
Español
